:
May 10, 2004
.
: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
.
Remove the tail pipe.
Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.
Disconnect from the exhaust hanger.
.
:
Do not tighten the retaining clamp at this stage.
Install the tail pipe.
Clean the components.
Install the retaining clamp.
.
Align the tail pipe and tighten the retaining clamp to 55 Nm (40 lb.ft).